I have used Arch for >13 years (btw) and use the terminal every single session. I also work with Linux servers daily, so I tried the other families with DEs (Debian/Ubuntu, RHEL/CentOS/AlmaLinux/Fedora).
I’m comfortable (and prefer) doing everything with CLI tools. For me, it’s a bit difficult to convert my Windows friends, as they all see me as some kind of hackerman.
What’s the landscape like nowadays, in terms of terminal requirements?
Bonus question: Which distribution is the most user-friendly while still updated packages? Does anything provide a similar experience to Arch’s amazing AUR?
GUI and shortcuts change everything
CLI rarely does and the only change is the name of a command
Depends on what they are doing, but I guess it’s pretty usable without cli interventions - at least for standard apps and unless something gets screwed. Fedora KDE.
I use Bazzite on my main battlestation and have only really “needed” to use the terminal once (in about a year). It’s definitely what I would recommend for people just switching from Windows, even if they don’t game.
Using Linux Mint, most of what I use I could without terminals if I wish. However, just like with Windows, terminal intervention will be needed sooner or later, usually to figure out why a given program isn’t working.
There’s a sysd GUI that you can use to look at logs. It’s much faster to just refresh the UI than searching your history for the right command
Exactly. You can get away without using the terminal on a lot of linux distros in the same way you can get away without using CMD on Windows… until one very specific thing breaks and suddenly it’s time to run
sfc /scannowfor the millionth time.I personally don’t understand why that command doesn’t run every time the system starts up by default, I wrote a script that ran it on startup years ago and I can’t tell you how many times it tells me that there were files that needed repairing.
SUSE has had graphical administration tools for literally decades. Somehow people always forget that.
Installing stuff works well from UI as well? I on/off did stuff with Ubuntu and every time I tried the App Store there was useless.
Yes, of course.
IMO the gnome store is lacking. Fedora KDE has Discover for it’s store. It has more buttons (GASP) and has easier control over which additional repos are shown in the store.
All the “software stores” I have seen: ubuntu’s software center, flatpack are utter trash. Offensively bad. I’m not sure how you can even get the flatpack store without the terminal.
so, e.g. flatpak tells you to install flatpak via commandline on ubuntu. Apparently it’s built into linux mint.
https://flathub.org/en/setup/Ubuntu
but when trying to install a random app,
https://flathub.org/en/apps/app.curocalc.calculator/install
the instructions are to “download file and execute”, but my filebrowser doesn’t have a “execute this file” option in my right click and double clicking does… nothing? Certainly doesn’t give me a popup with either confirmation or error message.
I’m game to try a few more things, so if you have suggestions what I should try, please tell me.
I’m on xubuntu.
Not sure if this helps, but don’t you need to right click and under permission allow it to run as a program?
Then I can often just double click and run
I heard the Debian 13 “software store” gives the user the choice between dpkg repo or flatpak for some major software (ig firefox, libreoffice) and that it was pretty lightweight and efficient.
Personaly as a software developer I always use the shell and mostly CLIs and TUIs, and I use Arch/Artix btw. Sometimes I try Flatpaks (for gaming purposes) but I’m always struggling with updates and huge need in storage. For a newbie advice, on Arch, I’d say : use AppImages for the software that isn’t available on Arch repositories, it’s by far the easiest thing to maintain during time and is surely the lightest.
In term of distribution, for a full GUI experience I’d go for Debian, or Mint Debian edition, but sadly for some hardware you still need workarounds that need the terminal use in after the OS install / updates.
Flatpak is not a store, it’s a package format. Mint has a built-in “Software Manager” GUI app that allows you to browse Flathub and install flatpaks from there. On Xubuntu, I guess you’ll need to install gnome-software or Bazaar, or just the
flatpakpackage if you don’t care about using a GUIThis is one of those intentionally misinterpreting posts that I really really… “dislike” in the linux community.
I guess you’ll need to install gnome-software or Bazaar
…which the official instructions don’t mention, so it’s not a valid answer. Again, I can get it to work, but that’s not the topic of this thread.
My intention wasn’t to misinterpret your post; I genuinely thought you were asking for help using flatpaks without the terminal on your Xubuntu setup. As for the topic of this thread, as a Bluefin user, I’d argue that we’re coming very close of being able to daily drive Linux without ever opening the terminal at all.
(also, the Flathub instructions page you’ve linked on your post do mention installing gnome-software)
deleted by creator
On Linux Mint, most updates and backups can be automated; installing ClamTK from Software Manager can be automated; the Software Manager, itself, is a GUI.
The terminal is helpful but required? Not really.
I cannot vouch for every distro and every use case out there, but for me, yes you can daily drive without having anything to do with terminal. Some distros have worked a lot ensuring this.
I would recommend to start with Linux Mint.
I agree. In my opinion Mint is one of the few distros that actually manage to make everything doable without the terminal.
I would stay that for 95% of usual tasks I don’t use terminal on Linux Mint Debian Faye 6 (LMDE), most of the software can be installed by double clicking a .deb file you download from the web. Compared to 10 years ago when I tried Linux for the first time (and reverted to Win back then) nowadys it is insanely more convenient to use.
Hell you can use Arch without the terminal if you really wanted to. CachyOS for example uses Octopi which is one of the few Arch Package Manager GUI’s that support both Pacman and AUR. so in that case you may never really need to touch the terminal and Octopi is preinstalled with CachyOS.
Other than that Fedora KDE or Bazzite are good options. But yeah there are few Distros where you really don’t need to use the Terminal if you don’t want to.
With Linux Mint you don’t need the terminal 99% of the time. The rest distros are close to 95% of the time. I always suggest Mint to new users.
Last time I set up Mint the only thing I needed the terminal for was to disable a setting on Java 8 that prevented it from launching on Xfce.
I didn’t need to use the terminal to do that, though. It just didn’t feel right editing a system config file with a GUI text editor.
turns off SteamDeck sorry, what’s a “terminal”? Isn’t it at the airport?
Jokes aside… yes, obviously, it only depends what you actually need to do. I recommend though NOT to be afraid of the terminal. The whole point about using Linux is to do whatever one wants. If that means avoiding the terminal, sure, that’s fine, BUT I believe the goal still is to be able to do MORE and the terminal is itself a very powerful tool. It’s not the terminal itself as much as the composability of the CLI.
So… finding a distribution with all the GUI and TUI and avoiding the CLI until they actually want to use them is great. Avoiding it entirely because no new skill was acquired is a missed opportunity IMHO. I want more Linux users, yes, but I also want BETTER users of any OS. Skilling up users so that we can all do more, together.
Yes.
After god knows how many years now of being on Linux exclusively, I tend to look at the terminal (commands in general) as a convenience more than a necessity. Meaning that in a lot of cases, knowing a command and quickly typing it to start an update (for example) is just faster and easier than pulling up the GUI every time.
I use both Fedora atomic (using cosmic DE) and Universal Blue’s Bluefin so I’m largely just getting on and doing things as software is Flatpak, updates are automatic and I use Box Buddy as the gui for distrobox (installing other architecture software). After years of terminal use I have found this way of working very liberating but know it’s not everyone’s cup of tea.












