This seems similar to the spammers who deliberately use bad spelling and get significant facts wrong in their scam email. They don’t want someone who understands things to get to the second stage and waste their time they are trying to get dummies who will fall for it.

I think that the company in question would treat their employees badly and they don’t want someone to accept a job offer and then quit when they learn how abusive the work environment is.

Firstly AMD and NVidia both have a range of cards with different power levels. Getting a card with 8G that uses the 75W available from the PCIe slot should be possible.

A card that is setup for ML isn’t necessarily going to work well for desktop use. I currently have a NVIDIA card in my workstation setup for ML and it gives 0.2fps on games. I installed the NVIDIA card because the AMD card died and decided to play with ML on it.

I think the best thing to do is to use a separate PC for ML.

A year ago I was working for a company that used such PC in the cloud services. 10 months of renting that cost about the same as buying an equivalent laptop. It wasn’t good.

If you mostly need a machine for word-processing and do something intense for an hour a week there might be a possibility of saving money, but for regular use no way.

Also if you have an office where people occasionally need a powerful system then just buy one powerful PC and have them share.

7430 is a nice system. I’ve done a lot with 7400/7410/7420 systems and some of my friends use them daily for programming.

Sure 16G is a restriction in some ways and some compilers take so much ram that make -j10 will fail on 16G but it’s still pretty decent.

What OS are you using? Linux works nicely on 16G, Windows is usable but not so good.

He created an environment that he’s comfortable with. If he didn’t like racism his discord would be different.

What parts of the Linux community do you see this in?

The parts I’m in have no Nazis and not much right wing support because right wing nowadays trends Nazi.

There’s really no difference between running Linux on desktop and laptop systems. As you have done it in a desktop the laptop will really be no big deal for you.

Sometimes drivers aren’t quite as good and maybe battery life won’t be as great. But laptop batteries last for ages nowadays so even a small reduction won’t hurt for most uses.

I’ve run a fleet of Linux laptops when doing corporate IT department work and run more than a few for myself and helped out friends. Generally everything works well enough.

Debian has an option to anonymously report packages installed. There’s a question about this at install time and at any time you can install or uninstall the popularity-contest package.

There’s no real difference between different brands of laptops that matters to distributions. In most cases there’s not even a difference between desktops and laptops that matters to distribution choice.

ThinkPads have always been well supported by Linux and older laptops are even better for support as there’s no issue of hardware newer than drivers.

https://matrix.org/category/dma/

There is work in progress to address this compelled by EU legislation.

Thanks for the advice, I installed the Debian package “read-edid” and used the get-edid program from it to get the EDID from the monitor. Then I installed the “wxedid” package to display it graphically because the parse-edid program from read-edid didn’t work well. According to wxedid there’s a seletion of 38402160 modes and some 40962160 modes. So it seems that the EDID is the problem.

MAXSUN Intel Arc B580 Milestone 12G Graphics Card (MS-ARC-B580-MILESTONE-12G

The above is the cheapest card from my local store that has DisplayPort 2.1 (the rest have 1.4). It’s $469 compared to $199 for a RX 6400 or RX 6500. I can probably find somewhere cheaper to buy these things but I’m working on the assumption that the ratios of prices are going to be about the same.

From the Wikipedia page it looks like DSC is needed to do 8K@60Hz on DisplayPort 1.4. I think that is bad for text though.

That card has DisplayPort 1.4 which means that if HDMI doesn’t work then it’s limited to HBR3 which gives 24bpp@31Hz, which is barely adequate.

Also how do you set the bpp rates? The DisplayPort wikipedia page says that 24bpp and 30bpp are supported, but how do I even know which is in use?

The PSUs have lights on in the normal manner, they both have green lights when the machine is unresponsive. The power is probably OK, it works well enough for many other systems. The PSUs are configured in a redundant configuration, I’ve tried it running each of the PSUs separately and running both. Tried running both from a Y cable and from separate cables. I’ve tried switching the PSUs between bays. None of this changes it. But all on the same circuit.

There’s nothing in the iDRAC logs related to it or at the same times.

Thanks for the suggestions. I’ll try it on a different circuit but I have to put it back together again.