Does it have to be sponsored though?
In the future, everything is brought to you by a corporation. Even your dreams! Have a pleasant day! (Sponsored by Eli Lilly)
I was following along quite nicely until step 9, where you bank-shot the needle off Mars and simultaneously looped it under the button.
“You can’t just sew a button onto the surface of mars” - Samuel Hayden
I think the toothpick or whatever is to put space while keeping the thread tight? So that when you lift the button everything is still tight and all you have to do is wrap under. The drawing is… not clear.
Yes, basically you want (because this is from a jeans company) to create a shank under the button, lifting it enough to fit thick fabric, but evenly so the button sits flat on top!
Hah, this reminds me of when I had to write repair manuals in college. I’d get so fixated on a particular tool, like a toothpick. I’d start by saying, “I’m definitely going to need this toothpick.”
by the end I probably didn’t even need it, but I included it anyway.
Oh man I thought that was the needle, not a toothpick. Suddenly this makes sense.
The toothpick is to provide spacing for the button, then you pull it out as you wrap the thread around underneath it.
Nah just shove it through in random patterns like a hundred times. It works well enough.
This is the way
I’ve had to learn it in middle school and took over an hour to put a thread through the needle
For the confused: https://www.youtube.com/watch?v=UNPVqbgEUCU
This is for an overcoat, something with thick layers of fabric. You can skip the raising and wrapping the thread around underneath for a shirt.
I think I’m stuck at 0. What kind of knot is used to keep both ends of the thread together?
The european death knot usually works pretty well. Or you could use a weaver’s knot, but it’s not as bulky. The ‘overhand’ family of knots is a pretty good bet for whenever you want a knot that absolutely will not come untied under tension.
I don’t knot the thread like in the picture. I anchor it into the fabric.
1 - Pass the thread through the fabric once, leaving a short tail. 2 - Pass it through the same spot to form a loop, keeping that tail from step 1. 3 - Pass it through the loop, but not all the way to form a second loop. 4 - Hold the tail, pull the second loop to tighten the first loop down to the fabric. 5 - Pass your thread through the second loop and tighten down to the fabric. (Sometimes I do a third loop before this step, but not always.) You have now anchored your thread.
I honestly double the thread up so that it’s a little tougher and then I just tie a regular knot at the end, but a few times. Hide the knots and you’re good.
deleted by creator
Not anymore. You can be a tailor’s apprentice with this knowledge
I’m sorry but this is way too complicated for what it is. I don’t care about logistics, this is a thing that should be able to be done in 8 steps instead of 18.
How would you do it in 8 steps, then?
Wise guy, eh? First I’d do it in 8 steps and then be done with it.
Ah yes, the “draw the rest of the owl” technique. I know it well!
Username checks out.
Cut off the buttons and sew on a zipper.
1,5,6,7,5,6,7,make a knot.
I usually repeat 5,6,7 until I am out of thread.
Perfect, I need to move a button on my jacket.
Eagle claw, screeeeech.
Ok. But now draw the owl.
Step 17 looks like a microcosm of me cable managing a PC
“What am I gonna do with all these extra cable bits? Oh right, same thing I do every time, jumble it up and stuff it in the bottom!”
Also, this feels like, unnecessarily complicated. Million dollar idea: thread staples. Shoot a couple pointy bits through the diagonal holes, it attaches itself on the back somehow (that’s for engineers to work out, I’m just the idea man), repeat on the other diagonal, bam, button attached.
It has the number of steps it does so that the pressure from the button holding your pants closed is evenly distributed over the fabric (and thread), so that nothing tears or rips. When sewing through cloth more points of attachment is generally better. You might be able to staple a button on without damaging the fabric over time, but it’s probably a lot less comfortable to wear than one sewn on.
Just attached a button to my pants yesterday, after the factory sewn button gave up.
https://www.amazon.com/Buttoneer-Button-Fastening-System-Necessary/dp/B09MR8GZR9
I’m including an Amazon link because I can’t imagine anyone actually following my comment and buying this piece of shit, but if it helps: don’t give Bezos money.
Now I just some lawyers to file some post-facto patents Nintendo style and collect my money
I just bought 2 dozen for my sweatshop 👍👍👍
Good to know! I was taught as a child because raised female, and its helped more over the years than I thought it would! And repairing rips along seams came up several times!
I still hate threading the needles.
I learned to moisten the eye of the needle instead of the thread. It makes threading a needle way easier. Also, making sure the thread is cleanly cut at the end and not fraying.
Oh they’re always clean cut! I’ll try moistening the needle over the thread next time, but it’s always so finicky.
I’m sure this is probably useful and makes sense in some way, but it’s really giving me rest of the fucking owl energy. I just can’t follow it clearly after like step 9 or so.
Step 8. The toothpick is used to loosen the loops and make distance between the button and the fabric. This is necessay. The button would be too tight to function properly otherwise.
Step 9 is to remove the toothpick and sew upwards under the button, but not through the button.
Steps 10-12. Since the sewing isn’t tightened down, you’ll need to secure it by wrapping the string around it a couple of times. (This is why you don’t sew through the button in step 9).
Steps 13-rest. Sew through the existing loops and tie a knot to secure the thread.
I’ve always done it like up to step 7, then finishing it, and it’s been fine for shirts and some pants - but I guess the extra steps do make sense for thicker fabrics.
Yes, it won’t make much difference to a shirt, but it’s necessary for a blazer or outerwear, where the fabric is thicker and the button is getting pulled a lot more.
















