Today, I washed my hands at the kitchen sink while making lunch, and was unexpectedly chastised by my partner because she had just started the dishwasher. Apparently, she has recently come across something that has convinced her that running the hot water in your sink means the water that enters your dishwasher will be hotter (checks out), and thus the dishes will be cleaner. I tried searching startpage to see if this is real, but I couldn’t make it through even one llm-slop-ticle about it before my eyes rolled back into my head, so here I am asking y’all: chat, is this real? Doesn’t my dishwasher have a heating element? Is there any meaningful difference between heating the water with a hot water heater vs a dishwasher, other than I can’t use my sink while the dishwasher is filling and I have to pour a bunch of cool water down the drain?
The dishwasher has a booster that brings to steaming- much hotter than your full-home water heater should be set to.
I wouldn’t worry about it. The difference in efficiency is negligible.
Not in the US.
US dishwashers run on a 15 Amp circuit so don’t have a preheat for the first wash. The heater is too slow.
How does that change anything in any meaningful way?
The difference between the hot tap and the cold tap is peanuts compared to the difference of hot tap to dishwasher’s hot.
It’s not even all that more efficient- unless you ignore the water heater’s energy use. There is, though some reason to hook up to the cold side any ways- water heaters can get nasty and the water in them is soaking in that nastiness.
That’s the dumbest thing I ever heard.
It’s an old thing that isn’t necessarily needed anymore. Technology Connections has a video about it.
https://m.youtube.com/watch?v=jHP942Livy0
Here is a video from someone explaining why you should run the water hot before turning on the dishwasher, along with a few other tips.
Upvote for Technology Connections
Some dishwashers have a hot and cold water intake, but it’s pretty rare, abd only makes sense if you heat your water with some alternative energy source. Letting the cold water bleed out makes sti zero sense either way.
The Technology Connections guy on YouTube thinks so
If you live in the US. Dishwashers works very differently in Europe for example.
Ah thanks, I was beginning to question everything I thought I knew about how my dishwasher works.
Reliably having 3 phase 230 V (thus 400 V delta between two phases) makes a big difference from single phase 120 V. Usually rated at 16 A too, available from each phase pair.
Almost 10 kW available at the peak (although almost nothing made for regular homes use it that much, aside from electric cars).
https://everycalculators.com/kilowatt-calculator-3-phase.html
As compared to a US outlet typically limited to 20 A at 120 V in one phase, giving you 2,4 kW (a quarter) or 15 A at 1,8 kW.
Indeed. Both apartments I’ve lived in (in Europe) had the dishwasher hooked up to the cold water feed, so preheating the water would absolutely do nothing at all.
I noticed an improvement preheating the water. It’s also probably more energy efficient than letting the dishwasher do it, if it can at all.
They both have electric heating elements so identical efficiency. The advantage is that priming hot water means it’s hotter for longer and reaches a higher peak temperature in the dishwasher, which means more effective cleaning.
Not every home heats their water with electric resistance heating. My previous place used natural gas for hot water, and my current home has a heat pump water heater, which has an effective efficiency much greater than a normal electric water heater.
The heating element in the dishwasher at best maintains the water at a warm temperature. It will not instantly heat the water up for the very short first cycle of prewashing, just like if you suddenly put cold water into a water heater it wouldn’t be suddenly hot. It takes a lot of energy/time to warm water up.
My statement is taken directly from TCs video where he graphed the temps for primed vs unprimed washing. Priming the water leads to hotter (higher peak) and more area under the curve. Not priming leads to lower peak temps, but it’s certainly warmer than at best warm. The element will heat your water up even hotter than it comes out of the primed line, assuming you primed it.
When I open my dishwasher it is absolutely steaming and the dishes are too hot to handle. This temperature is above the setting on the hot water heater, ergo this extra heat can only have come from the heating element. It provides significant extra heat.
You are correct that it will take significantly longer than the prewash cycle’s duration and is not something to be relied on if you want optimal washing.
He also said that with modern detergents, you should do colder washes anyway, as the hot water has little benefit.
Yes. I’ve watched all of them in their entirety
Technically I think he says that IF your dishes don’t already get clean.
Yeah if you aren’t having issues why make the extra step
Edit: okeedokee I’m wrong.
GE Appliances: Dishwasher - Correct Water Temperature
Ummm…what are all the USA people in here talking about?
I’ve installed and replaced my own dishwashers 4 or 5 times over the years and helped friends and family members many times. They only last about 5-7 years so it happens often enough for it to be routine for me.
The water supply is connected to the cold water. The dishwasher has it’s own heating element. It heats the water to “sanitizing” levels. There’s even a sanitize button.
That water gets so hot that I can’t open the door mid-cycle with my reading glasses or they’ll get completely fogged up.
The sanitize button is not a new development…
They aren’t all designed to connect to your cold water line. In fact, most seem to specifically instruct you to connect to your hot water intake. You are right that most in the US have water heaters, but that doesn’t mean that the machine’s cycles will heat the water effectively for the full duration of the wash.
Maytag, Whirlpool, GE, and LG all recommend you connect to hotwater. Bosch (EDIT: Spelled this like the drug company not the appliance company) recommends cold. Depending on your machines cycles as well, the heating element may not get the water hot enough to make effective use of the pre-wash cycle. If your machine is connected to the hot water line and you purge the cold water from the line, you will see a more effective pre-wash (and thus more effective wash) than if you let it run cold.
North America vs Europe, North America cannot heat the water fast enough due to the limit of being on a 120V and 15 A circuit.
Not USA but North America and we ours is hooked to hot water. Has to do with having a shitty heating element since they wanted it to be plugged into 120 15A circuit.
You probably have higher voltage and more power going to that heating element, so the cold water line is fine. In the US, the heating elements in our dishwasher can’t draw enough power for cold water, so it needs to start with hot water.
Also, 5-7 years is… Pretty bad. It’s not uncommon for dishwashers to last multiple decades here. I’m pretty sure mine is at least 20 years old (and ugly lol)
I checked under my cabinet just recently, and the dishwasher is indisputably connected to the hot water line.
It was like this in the last place, too, and my sibling’s place.
They have 120 volt electricity, it can’t heat quickly enough, so the wash cycle will begin with less than optimal temperature and take a while to get to sanitizing temperature.
So they feed it water from the hot water tank, which isn’t hot enough usually but the heating element can get it up to temp much faster at 120v.
Many modern dishwashers only have a cold water inlet so it literally does not get water from the hot water tank.
120V really doesn’t matter that much as they are commonly on their own 20A breaker. At 1500W of power it can heat 1.5L of water from 60F to 168F in 1 minute.
Where are you getting your information? Can you find an example of a dishwasher where the installation manual says to use cold water?
And the claim that 120v doesn’t matter is baseless.
At 1500W of power it can heat 1.5L of water from 60F to 168F in 1 minute
Lol no it can’t, are you nuts? That’s physically impossible and mathematically incorrect by a factor of more than 4.
My information is based on installing 3 dishwashers in the US that all said to either connect to cold water or give an option for cold water or hot water
Voltage doesn’t matter for heating what matters is overall power. 1500W at 120V and 1500W at 450V both heat at the same rate. The advantage of higher voltage home systems is they usually allow higher power since current is generally the limiting factor but they make higher current breakers for 120V
I was off on my conversions and did calories instead of joules. Either way it takes 4 minutes to get from 60 to 160 which is still trivial on a multi hour cycle
Here is one that allows either connection but emphasizes increased efficiency with hooking up to cold water. I admitted I was wrong on my conversions will you admit you are wrong that they have to hook up to hot water?
Here is one that allows either connection but emphasizes increased efficiency with hooking up to cold water.
"For fastest possible wash times, with slightly higher energy consumption, connect the dishwasher to a hot water source. Hot water supply specifications: Recommended temperature: 120 °F (49 °C), max 140.
will you admit you are wrong that they have to hook up to hot water?
I never said that.
So weird. You want to be right? Okay, you’re right, you don’t have to hookup to a hot water, it’s recommended and commonly done… I didn’t claim you have to… The reason it’s recommended to hook to hot water is because it’s slower at 120v. They all allow you to do whatever the hell you want, but American tap water (which doesn’t sit in a rooftop tank that gets warm as it sits around, but that doesn’t apply much in the northern hemisphere) is typically not ideal.
You want your dishwasher to take longer? hook it up to cold water and save some electricity, you do you.
1500W at 120V and 1500W at 450V
Why would I use 1500W at 240V? My dishwasher has a 2100W heating element, which heats 40% faster, that’s not negligible. You can get higher wattage models.
You installed 3 dishwashers? That doesn’t make you an expert on international dishwashers, it just makes you a homeowner. Jesus, you don’t have to just argue for the sake of arguing, just say “I learned something dumb today” and move on with your life.
You said “Many modern dishwashers only have a cold water inlet so it literally does not get water from the hot water tank” and then provided an example that says what I said, if you want a faster wash use hot water.
The reason most of the world uses the cold tap for dishwasher hookup is because they use a higher wattage heating element, which they can operate safely because they use 220V power. I didn’t come up with the 1500W limit, you did, don’t move the goal posts.
It is real.
Here’s the biggest rabbit hole you can go down. Alec has multiple videos just about dishwashers.
You can curse me later when you’ve spent 2 hours learning about Christmas light colours and LEDs.
thank you. I’m supremely annoyed that I’m reduced to posting to fedi to find good sources for a basic adulting question, but I’m equally grateful when someone comes through for me.
If you read the dishwasher manual you’d find it in there.
Always try to be one of today’s lucky 10,000: https://xkcd.com/1053/
Just mind that his is a mostly American-centric view. Here in Europe my dishwasher is hooked up to the cold water. Energy usage is negligible.
European dishwashers seem to be designed vastly differently to American ones.
Water efficiency goals specifically; I’ve seen consumption of 7 US gallons (26.5 litres) per cycle called “eco” on American dishwashers, where mine (Miele) claims 12 litres on the heaviest cycle.
The manual for mine calls out connecting to hot water as a way to increase efficiency if you have hot water with a >1 COP, mentioning solar or heat pump cylinders.
A professional I asked noted though that for protein-heavy residues (like egg), hot water could bake it on before the dishwasher starts cleaning it.
A professional I asked noted though that for protein-heavy residues (like egg), hot water could bake it on before the dishwasher starts cleaning it.
And a little detergent in the pre-wash helps a lot with that. (My machine, a Bosch, does not have a pre-wash compartment so I just spill a little when I fill it.)
It’s my understanding that dishwashers generally do not have a heating element, so the hot water is coming directly from your water heater. I believe you should run the sink water till it gets hot before starting the dishwasher, and not run cold water until the dishwasher stops filling. They generally share the same line. If the dishwasher had a dedicated water line I imagine it wouldn’t make a difference, but most inexpensive dishwasher models and homes share with the sink.
Hot and cold do not use the same line. Dishwashers tap off the hot water pipes to your sink. They also commonly have heating elements. Even my $150 landlord special Midea has one. Running cold water in the sink after it starts has no effect. There’s no cold water connection to the dishwasher.
Yeah, I was wrong about the heating element, but I would still run the water hot. Check out the video I posted
Yeah, I’m echoing my knowledge from that video as well.
And yeah, the hot water cleans better, especially if you have stuck on food.
Ok edit: your dishwasher DOES have a heating element, but it’s not enough on its own, so the logic still applies. If you want the full deep dive check this out, I love this guy’s videos. https://youtu.be/jHP942Livy0?is=KOvmqlGaLBekpM6Y
You don’t see the giant bent calrod in the bottom?
I do, based on an older vid from the guy CADmonkey referenced. My hot tap water gets to about 120°F.
My sibling’s dishes won’t get clean unless she runs the water first, as her sink takes a crazy amount of time to warm up.
YMMV though. Not all sink piping takes so long to “warm up” anyway.
So test it!
Run a dirty load. If your dishes get clean in the dishwasher, no problem; your routine ain’t broke. If you aren’t satisfied, try running the hot water first.
It’s certainly not worth an argument with an SO though, as it could plausibly help.
I’m not sure why you’re being chastised for using water while the dishwasher is filling. That is a non sequitur. But for most people, the answer is probably yes, it moderately improves performance.
I’m just telling you how I discovered his piece of information. It was a very normal household interaction but with a dash of source amnesia.
edit: I misunderstood how you meant non sequitur. I turned the water cooler to wash my hands because I have soft hands and cannot tolerate the water at full heat.
That won’t make a difference. You need to pull the hot water up before you start the dishwasher, but after that you can run the sink with pure cold water and it won’t change the dishwasher temp at all. The dishwasher is connect to the hot water pipe directly
I had a suspicion. Water coming out of pipes is just kinda black magic for many people (not to be negative, irs just not worth learning about). Because the cold and hot water don’t combine until inside the tap, it doesn’t matter for the dishwasher. But pulling hot water out of the tap gets hot water to wherever the dishwasher ties in - in most kitchens, but not always in fancy ones.
Doesn’t work for me. My dishwasher water line is a separate line. It has it’s own valve at the manifold.
It’s just to get the hot water flowing in the hot water line. So your dishwasher doesn’t get as much cold water as it would other wise.
I believe one of the technology connections videos talks about making sure the sink water is hot so the dishwasher can have hot water and not clean with cold water
It might be this video
https://www.youtube.com/watch?v=jHP942Livy0came to post this. note: this works if your dw is on same line feed as sink. if for some reason it’s not, you can’t purge the cool water away.
One thing I just want to point out that’s stated in the video is the hot water is for the pre treat cycle. It always heats up the water for the main wash cycle.
In the United States and other countries with 120V electricity









