Right, I did look at the dimensions. You can’t fit a 30cm circle into a rectangle 23cm wide no matter how long it is though.
Cast iron heats up quite slowly, so any part not being heated means the pan is still going to be partially sticky, at least in my experience with induction.
Ultimately if I was in the position to be choosing my own hob, I’d probably just also buy a pan that fits the area. I’m not a gas burner advocate by any means.
Right, I did look at the dimensions. You can’t fit a 30cm circle into a rectangle 23cm wide no matter how long it is though.
Cast iron heats up quite slowly, so any part not being heated means the pan is still going to be partially sticky, at least in my experience with induction.
Ultimately if I was in the position to be choosing my own hob, I’d probably just also buy a pan that fits the area. I’m not a gas burner advocate by any means.
I did…
Neff N90
Left and right 20x23 cm, center 30x23cm they can work together
I do this all the time
And yes, there is a dead zone but its just a few centimeters and conductivity for heat in metal is pretty high
Or Siemens iq700 No knob however